Tag Archives: build a pc

Building a New PC – Build Day

In mid-October, I managed to get all of the components for my new PC together. Building something like this – knowing that so many of the options involved were solely my decision and not dictated by a console maker or a PC manufacturer – was extremely satisfying.

Computer Components

You can read about my reasoning for the various components here. I have been very happy with performance of the components so far. Both the graphics card and the processor fan are much quieter than I was expecting, even when running a new game like Arkham Origins with the best graphics options. It isn’t completely silent, but it’s difficult to hear over ambient noise and impossible to hear over noise from a game or DVD. Compared to both the original Xbox 360 and the Xbox 360 Slim, it is much, much quieter.

Assembling the computer was relatively easy. The biggest problem I had was running out of desk space for everything I needed to have to hand. Access to a large kitchen or dining table would have been really helpful.

Other problems were extremely minor. Having no experience using modern Intel sockets, I was expecting the processor to fit into place sharply. When the bracket closed with a noise that is more of a creak than a snap, I was quite surprised and it took me a few minutes to make sure I had inserted everything correctly and wasn’t mashing the pins on the bottom of the processor into a pulp.

Cable Nest

The final problem I encountered was a cable from the processor’s cooler catching on the fan. This prevented the fan from spinning, leading to a rather toasty processor. Thankfully, I spotted the higher than expected temperature in the BIOS screen when I was checking that everything was correctly set-up and was able to loosen the cable. Ten years ago, that could have led to a fried processor, but most modern chips shut themselves down before damage can be done.

Other than that, I can’t believe how simple the overall process is. I think I’ve had more grief when trying to assemble larger items of Ikea furniture. Of course, a sideboard doesn’t have a dozen fiddly cables which have to be coerced into some vague state of tidiness or very, very small connectors which have to be slipped on to tiny pins.

In terms of performance, it far exceeds what I was expecting. The GTX 760 is more than powerful enough to handle Arkham Origins and Skyrim at 1080P without having to increase it’s fan speed. Both games easily deliver 60 frames per second or higher. In the case of Skyrim, this is delivered without any of the stuttering or texture tearing visible on the Xbox 360 version of the game. The beautiful aurora and near endless landscapes in Skyrim very nearly justify the spend on a gaming PC on their own and I cannot wait to try out some of the higher resolution fan-made texture packs.

 

Building a New PC – Components Picked

After nearly a year of research and deliberation, I have finally taken the big step and ordered the components for my new gaming PC. There have been a few changes in the last few months – particularly the case.

PCPartPicker part list: http://uk.pcpartpicker.com/p/1OfqF

CPU: Intel Core i5-4570 3.2GHz Quad-Core Processor
Motherboard: Gigabyte GA-Z87N-WIFI Mini ITX LGA1150 Motherboard
Memory: Crucial Ballistix 4GB (2 x 4GB) DDR3-1600 Memory
Storage: Samsung 840 Series 120GB 2.5″ Solid State Disk
Storage: Seagate Barracuda 1TB 3.5″ 7200RPM Internal Hard Drive
Video Card: MSI GeForce GTX 760 2GB Video Card
Case: Fractal Design Node 304 Mini ITX Tower Case
Power Supply: Corsair CX 500W 80 PLUS Bronze Certified ATX12V Power Supply
Operating System: Microsoft Windows 8 (OEM) (64-bit)

I chose the RAM and hard-drives on the basis of good quality products coming up on offer. I managed to save about £40 this way. The majority of the rest of the components aren’t subject to such big price fluctuations.

I backed off from my previous choice of case due to it’s size, instead opting for some discreet Scandinavian design in the form of the Fractal Node 304. It unfortunately doesn’t have space for a DVD drive, so I’ve picked up a cheap external drive to go with it. Sadly, the internet speed in my area of London isn’t good enough to let me rely solely on software downloads.

Some of the Haswell processors have dropped in price recently, which did make an upgrade to the slightly more powerful i5-4670K, which can be overclocked, but as I have no real interest in overclocking, I stuck with the more than adequate i5-4570.

I’m inclined towards nVidia graphics cards over AMD’s products anyway, so when they GTX 760 came out at the right price point I was half sold on it already. The MSI version of the card is reputed to run both coolly and quietly. I may yet regret going with nVidia over AMD if the use of AMD components in the XBox One and PS4 leads to major games performing better on AMD systems.

Finally, after a long debate with myself, I decided on Windows 8 as an operating system. I really like Windows 7, which I previously had on my Mac and which I use at work. It’s very slick, very simple and looks fantastic. I decided that I didn’t just want to stick with what I know in terms of Windows. I’m sure I can deal with the loss of the Start menu. Anyway, there is always SteamOS if I really don’t like it.

Interestingly, the finished computer will be very similar to some of Valve’s prototype Steam Machine PCs. The main differences are the amounts of storage and RAM.

Choosing the Right Components: Holding Out for Haswell

Intel P4 Processor by Eric Gaba, CC BY-SA 3.0

Intel P4 Processor by Eric Gaba
CC BY-SA 3.0

For a long time, the desktop computer processor market has been dominated by two companies: Advanced Micro Devices (better known as AMD) and Intel. After the PC boom of the 80s when Texas Instruments, IBM and other semiconductor companies were competing on a equal footing only Intel and AMD emerged with high powered, innovative consumer products for the late 90s and 00s. Except for a brief period in the mid 00s, Intel has always been the more dominant of the two companies, despite struggling to gain traction in the lucrative tablet and smartphone markets in recent years.

Back in 2004, I would have been stupid to buy anything other than an AMD processor. While Intel struggled to get faster clockspeeds from the Pentium 4 chips due to heat dissipation problems, AMD had introduced a 64-bit extension to the x86 instruction set, produced a successful consumer 64-bit processor and begun what was to become a near domination of the server processor market. To all intents and purposes, it looked like AMD were about to go from being an underdog to replacing Intel as the dominant power in the processor world.

The situation is completely reversed today. Intel abandoned a large part of the Pentium 4 processor architecture in favour of the Core architecture and have found phenomenal success with it’s increasingly powerful derivatives. AMD are struggling financially and have seen their most recent processors struggle to compete against faster and cooler Intel chips (Ars Technica has a good article about how AMD arrived in this situation).

Given that Intel processors run at much cooler temperatures and use less power while giving greater performance, I am firmly in the Intel camp. Next month, Intel will be launching their next generation processor, based on the Haswell architecture. These are expected to reduce power consumption and heat generated further while retailing at the same price point to the current generation of processor. The Haswell chips also use a new motherboard socket, meaning that a compatible motherboard should last for at least four to six years before needing an upgrade.

As far as models go, I see my choice as being between the enthusiast orientated i5-4670K or a more budget orientated i3 chip. The i5 is a four core processor, due out in June and will likely provide my system with an excess of computing capacity. The i3s haven’t yet been announced, but are expected to go on sale sometime towards the end of the year. The current generation of i3 processors have only two cores but due to poor use of multiple cores by game developers, they are more then capable of running high end games.

There are some arguments for going for an AMD processor over an Intel chip. Xbox Infinity is expected to use an AMD processor and it has already been confirmed that the PS4 will use a customised version of AMD’s Jaguar laptop processor. Some argue that this will lead to games being better optimised to run on AMD hardware. I’m not familiar enough with the diferences between AMDs mobile and desktop processors to comment on this, but given Intel’s dominant position in the market, I find it hard to imagine that developers wouldn’t take the time to optimise games for both Intel and AMD systems. This may, of course, be rather naïve, but only time will tell.

Choosing the Right Components: The Case

When you start to look at PC components  the range of parts available seems bewildering. Even the differences between pre-built models can seem impenetrable. Intel, AMD and Nvidia all use note entirely straight forward numbering systems where the performance difference between products is not always clear.

It is quite easy to decode the naming schemes, although it takes time to learn. Websites such as Logical Increments or groups like BuildAPC Reddit provide guides and advice on choosing parts and how to find the best bang for your buck. Of course, you still have to take a lot of time and care to select the components that will work best for you. I’ve been looking at the various components and getting up to speed with the modern PC market for several months now and with the exceptions of the processor and motherboard, which I’ll finalise after the release of Intel’s new Haswell processors, I’ve made my choices.

The first component I chose for my computer isn’t generally something you would pick first: the case. In many ways, the case is a non-critical component: all it needs is sufficient ventilation to cool the processor and the graphics card, something to keep dust out and mounts for the various components. It doesn’t even need to be new – the standardisation of the ATX motherboard means that cases that are nearly 20 years old should comfortably hold modern components (albeit with a bit of bodging).

I remember PC cases in the 90s being uniformly beige, generally boxy and normally uninspiring. Concepts like airflow didn’t play a big part in the design of these cases, which often came without dust filters and with a tangled mess of wiring. So it was surprising to find out that cases now look like this.

While Corsair’s Graphite series cases are pretty unique, they are representative of modern cases. The beige is gone. Now cases are built from high quality aluminium or steel, power supplies have been relegated to the bottom of the case to keep them cooler, there are trays underneath motherboards to allow for the neat routing of cables and there are modular internal components allowing you to customise a case to your needs. Importantly, the ‘designer’ cases no longer look like glowing, plastic monstrosities but take their design queues from companies like Apple and BMW. It’s a different world.

My first preference for my own system is Obsidian’s 600T in white because it looks like a Star Wars Stormtrooper’s PC, however building a full size ATX system just isn’t practical while living in a London houseshare. If nothing else, I will need to move it at some point and I’m not prepared to drag 30 to 40 kilos of PC across the city on public transport. So, I’m compromising by going for a Mini-ITX system.

BitFenix ProdigyThe main advantage of a Mini-ITX system is it’s size. The motherboard is the fraction of the size of an ATX board. You do lose some features as a result of this, but enthusiast quality ITX boards are more then capable forming the basis of a good gaming and home media system. A lot of ITX cases are extremely cramped and designed for use with low power processors and integrated graphics processors, so an ITX gaming system does need something a bit roomier and with space to ventilate a graphics card and a decent processor.

Thankfully BitFenix, one of the more innovative case manufacturers, have brought out the Prodigy. It looks like a squat Mac Pro and can fit all but the largest graphics cards but it’s small enough that it can be easily carried in a sports bag or similar. It also supports water cooling, which I find amazing. Ten years ago, water cooling was the preserve of madmen and the elite overclockers, now it’s almost standard, even in cases this small.

Small but powerful and versatile – it’s all I really want in a PC.